Silicone O-ring Hardness Selection
Oct 05, 2023
The use of silicone O-rings plays a very important role in many industries. Whether it is small object processing or large-scale machinery production, silicone O-rings are not easy to see, but they cannot be ignored. Place plays a very important role.
When using silicone O-rings, since there are many types of products to choose from, the choice of hardness is very important. For example, the sealing ring of a water pump turbine in a power station with a hardness of 70 (Shore) often peeled off or even cut off laterally. Then a sealing ring with a hardness of 85 to 90 (Shore) was used, and the effect was ideal.
If the hardness of the silicone O-ring does not match the installation area, problems will occur. If the hardness is too low, it will easily cause peeling, installation damage, extrusion and even pressure explosion; if the hardness is too high, installation will be inconvenient.
Usually the hardness of silicone O-rings is 40 to 90 IRHD, but in use, 60 IRHD is generally more appropriate.
Only by selecting the appropriate silicone O-ring and using it in the right position can the effect of the silicone O-ring be exerted and ensure the quality of the entire product in the field of application. This is also an important shortcut for development for enterprises. It can make recommendations based on customer needs, which not only reflects professionalism, but also provides customers with good suggestions.






